Thursday, December 29, 2011

Intex Easy Pool Set, 12-Feet x 36-Inch

Intex Easy Pool Set, 12-Feet x 36-Inch

Shock Sale Intex Easy Pool Set, 12-Feet x 36-Inch very cheapYou looking to find the "Intex Easy Pool Set, 12-Feet x 36-Inch" Good news! You can purchase Intex Easy Pool Set, 12-Feet x 36-Inch with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Intex Easy Pool Set, 12-Feet x 36-Inch On Sale

Price: $90.00 $73.99   Updated Price for Intex Easy Pool Set, 12-Feet x 36-Inch now
Purchase Intex Easy Pool Set, 12-Feet x 36-Inch low price

Product Feature

  • 110-120 volt GFCI
  • East set pool set with filter pump
  • Water Capacity (80%): 1,179 gallon
  • Sets up and ready for water in 10 minutes

Product Description

12'x36" East Set Pool Set w/530G Filter Pump 110-120 volt GFCI. Sets up and ready for water in 10 minutes. Water capacity (80%): 1,179 gallon.

Intex Easy Pool Set, 12-Feet x 36-Inch Review

I read many reviews on these intex pumps, and the problem that seems to plague them is a cheaply made plastic impeller that moves (pumps) the water. So listen up folks... if you buy a replacement pump, or even buy a pool set for the first time, BEFORE you even use the pump for the first time, take it apart until you can remove the impeller. This is pretty simple requiring only about 4 or 5 screws be removed... just make sure you pay attention to how it comes apart (especially the washers around the impeller). Then go down to walmart, home depot, lowes, or any auto parts store and buy some EPOXY. This should be two different liquids (or gels) that come in two different tubes that you must mix together. This stuff is SUPER STRONG, and most are rated for 2,500 to 3,500 lbs per square inch of strength... like steel almost. So what your going to do is get a small paint brush, and "paint" the impeller with epoxy, making a SUPER STRONG coat over the cheap plastic. Just make sure you don't get any on the inside of the hole in the center of the impeller where it slides onto the metal rod. Allow it 24 hours to dry (depending on what type of epoxy you use), and then reassemble the pump. I guarantee this will save you money and headaches in the long run. Also if any other plastic parts break on the pump, you can use this epoxy to fix/repair/strengthen them as well.

Most of the consumer Reviews tell that the "Intex Easy Pool Set, 12-Feet x 36-Inch" are high quality item. You can read each testimony from consumers to find out cons and pros from Intex Easy Pool Set, 12-Feet x 36-Inch ...

Buy Intex Easy Pool Set, 12-Feet x 36-Inch Cheap

No comments:

Post a Comment